Canon CR-50 운영 및 유지보수 매뉴얼 - 페이지 9
{카테고리_이름} Canon CR-50에 대한 운영 및 유지보수 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Canon CR-50 24 페이지. Check scanner
Canon CR-50에 대해서도 마찬가지입니다: 설치 매뉴얼 (21 페이지), 브로셔 및 사양 (26 페이지), 사용자 설명서 (14 페이지)
페이지 인쇄
Troubleshooting
This chapter describes the problems that might occur in the CR-50/80,
and how to remedy them.
When the Scanner Is Not Recognized
The following causes and remedies describe why your computer may
not recognize the scanner.
Cause
The Scanning Utility is not installed.
Remedy
Install the Scanning Utility before connecting the
scanner to the computer. (See "Setting Up the Scanner,"
on p. 17 in Instructions.)
Cause
The scanner is not correctly connected to the
computer.
Remedy
Connect the scanner to the computer correctly. (See
"Connecting the Scanner to a Computer," on p. 21 in
Instructions.)
Cause
The USB interface provided as standard with your
computer is not compatible with the scanner.
Remedy
Not all USB interfaces provided as standard with
personal computers are guaranteed. Contact your local
authorized Canon dealer for more detailed information.
(See "Checking Your Operating Environment," on p. 18
in Instructions.)
Cause
USB cable is not compatible with the scanner.
Remedy
Use the USB cable provided with the scanner. (See
"Checking Your Operating Environment," on p. 18 in
Instructions.)
Cause
USB hub is not compatible with the scanner.
Remedy
Remove the USB hub to use the scanner. (See
"Checking Your Operating Environment," on p. 18 in
Instructions.)
Clearing Paper Jams
If paper has jammed, open the Maintenance Cover and remove the
jammed paper.
IMPORTANT
Do not attempt to pull the jammed paper upwards or backwards
against the feeding direction. Doing so can damage the internal parts
of the scanner.
CAUTION
• Be careful when you clear a paper jam. You may be injured
unexpectedly. For example, the paper edges may cut your
fingers, or the document may be damaged.
• Remove all jammed sheets of paper. Paper scraps left inside
the scanner may cause a paper jam or malfunction.
1
Hook your finger around the open lever and open the
Maintenance Cover.
9