Canon D1230U/D2400U 제품 설명서 - 페이지 21

{카테고리_이름} Canon D1230U/D2400U에 대한 제품 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Canon D1230U/D2400U 24 페이지. Color image scanner

ScanSoft OmniPage

ScanSoft OmniPage Pro (Windows) / SE (Macintosh) is an optical character recognition (OCR) program

that converts characters scanned from a book, magazine or newspaper into text data for editing or

digital transmission. After conversion, the text can be edited with word processors and similar

programs.

Windows

Starting OmniPage and the Driver Software

Windows

When you install OmniPage Pro, the Add Scanner Wizard will display. Choose the [CanoScan

D1230U] or [CanoScan D2400U] option. This instructs OmniPage Pro to select the correct

scanner for scanning.

1. Click the Windows [Start] button and select [Programs], [Caere Applications] and

[OmniPage Pro 9.0]. OmniPage Pro will start.

2. Click the [Scan Image] button on the toolbar, or open the [Process] menu and select [Scan

Image]. The scanner will start scanning and display the scanned image in OmniPage Pro.

• If the toolbar button displays as [Load Image], click the arrow and select [Scan

Image]. Or if the Process menu item displays as [Load Image], open the [Process]

menu and select [Process Settings]. In the [Process] tab, select [Scan Image].

Macintosh

1. Open the [OmniPage 8 SE Folder] folder and double-click the [OmniPage 8 SE] icon.

OmniPage SE will start.

• For the initial setting, open the [Settings] menu and select [Select Scanner], then

select [CanoScan D1230U] or [CanoScan D2400U].

2. Click the [Scan Image] button on the toolbar, or open the [Process] menu and select [Scan

Image]. Canon Plug-in Module CS-U will start and display its control panel.

3. Select [Black & White] as the scan mode and [OCR(300dpi)], [OCR(400dpi)] or [OCR(600dpi)]

as the output device. Click the [Scan] button. The scanned image will display in OmniPage SE.

• If the toolbar button displays as [Load Image], select [Scan Image] from the

button below it. Or if the Process menu item is labeled [Load Image], open the

[Process] menu and select [Process Settings] and [Scan Image].

Windows & Macintosh

Macintosh