Akw 04070 설치 및 사용자 설명서 - 페이지 5

{카테고리_이름} Akw 04070에 대한 설치 및 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Akw 04070 8 페이지.

The support legs must not exceed a maximum of 1 in 40 shower base slope when placed in

the down position. Curved surfaces such as corners of bathtubs are not acceptable.

adjust support legs ensuring that both legs sit

firmly on a flat surface.

Remove the leg C-clips.

adjust the leg height to the desired height

when the seat is level in the down position.

insert C-clips.

Unscrew the adjustment foot until this it

tight against the floor and lock the foot

with the nut tightened up with a spanner.

Installation

mark the desired position of the mounting

brackets on the wall ensuring the seat is level.

Adjust the feet to make finer adjustment.

Use suitable wall fixings to secure the

mounting bracket to the wall. Do not use

countersunk screws.

Order: 01905 823 299

orders.akw-ltd.co.uk

installation

Check for cables and pipework before

drilling. Drill the holes with a suitable wall/

tile drill bit and insert wall plugs.

Ensure all fixings are secure. Re-attach the

seat mouldings onto the frame and ensure

the feet are flat against the floor surface.

Technical Support: 01905 560 219

X10