Akw 04110 설치 및 사용자 설명서 - 페이지 4

{카테고리_이름} Akw 04110에 대한 설치 및 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Akw 04110 8 페이지.

essential installer information

Safe Handling Operation

always hold the seat and legs as shown in the picture if opening the seat when inverted.

•

never force the legs apart or open the seat by lifting only the legs.

•

Lay the seat on its back on the

floor. When placed on the floor,

the legs are locked down by the

mechanism. Lift the seat base

and legs up together.

This seat must be attached to a finished vertical surface, capable of supporting the specified

weight limits using suitable fixings appropriate to the type of surface and loading conditions to be

applied. Check that the floor surface is suitable for the feet loading conditions. Acrylic shower trays

are not recommended.

Never exceed the weight capacity of 40 stone (254 kg) (560 Ib)

•

Do not use fixings with countersunk heads.

•

Take care not to damage the painted surface on the brackets.

•

Make sure that all fixing holes are used.

•

Stainless steel fixings are recommended but not supplied.

•

Once installed check that the plastic pivot caps are firmly in place and the leg C-clips are installed.

•

Remove the Seat cushions and mouldings.

Un-clip the seat molding from the mounting frame to gain access to the mounting brackets by

pushing the molding clips from the rear or underneath the frame.

General: 01905 823 298

STOP

5 4 3 2 1

X X X