Canon DR-4010C - imageFORMULA - Document Scanner 사용자 설명서 - 페이지 18

{카테고리_이름} Canon DR-4010C - imageFORMULA - Document Scanner에 대한 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Canon DR-4010C - imageFORMULA - Document Scanner 31 페이지. Imageformula
Canon DR-4010C - imageFORMULA - Document Scanner에 대해서도 마찬가지입니다: 브로셔 및 사양 (26 페이지), 브로셔 및 사양 (16 페이지), 브로셔 및 사양 (2 페이지), 간편한 시작 매뉴얼 (2 페이지), 브로셔 및 사양 (4 페이지), 브로셔 및 사양 (33 페이지), 브로셔 및 사양 (4 페이지), 브로셔 및 사양 (4 페이지), 브로셔 및 사양 (16 페이지)

Canon DR-4010C - imageFORMULA - Document Scanner 사용자 설명서

Scanning with Job Functions/CaptureOnTouch

Scanning with Job Functions

By using Job Registration Tool or the job function in CaptureOnTouch,
you can register scanning conditions as jobs. Registered jobs can be
executed by pressing the start button on the flatbed.
The following software supplied with Canon DR-series scanners is
required to use the job function.
Canon DR-Series Scanner
DR-2010C, DR-2510C,
DR-3010C
DR-6010C, DR-6050C,
DR-9050C
IMPORTANT
• If you connect the flatbed to a Canon DR-series scanner that you
have been using since before the flatbed was purchased, make
sure to download the latest version of the above software from the
Canon support Web site (http://www.canon.com).
• For details on compatibility with newer models that are not listed
above, contact your local authorized Canon dealer.
1
Register a job.
Start Job Registration Tool or CaptureOnTouch, and register a
job. For details, refer to the Help for Job Registration Tool or
CaptureOnTouch.
2
Place the document (See p. 15).
Required Software
CaptureOnTouch
Job Registration Tool
3
Press the start button on the flatbed.
The job function or CaptureOnTouch starts, and the document
placed on the flatbed is scanned automatically.
IMPORTANT
Do not move the document placed on the scanning glass while
the power indicator is flashing and scanning is in progress.
NOTE
Registered jobs can also be assigned to the buttons on the
connected Canon DR-series scanner (start button or job buttons,
depending on the scanner model).

Scanning with CaptureOnTouch

You can scan documents placed on the flatbed using the software for
the connected scanner, CaptureOnTouch.
Scan First is assigned to the start button on both the flatbed and the
connected Canon DR-series scanner. You can start a scan procedure
by pressing the start button on the scanner in which the document is
placed.
Other operations for scanning are the same as those during stand-
alone use of the Canon DR-series scanner. For details, refer to the
User Manual of the connected Canon DR-series scanner.
18
Start Button