ASTRO DEVICES Nexus DSC 빠른 설정 매뉴얼 - 페이지 9

{카테고리_이름} ASTRO DEVICES Nexus DSC에 대한 빠른 설정 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. ASTRO DEVICES Nexus DSC 13 페이지.

The display will show the last selected object:

Suppose we would like to find NGC55. Just

press the

key and the display will prompt

to continue typing the object number:

Now press the

Nexus DSC will now show where to move the

telescope to aim at NGC55:

It shows that the telescope needs to be moved

down by 6.9 degrees and counter clockwise

by 59.7 degrees. As you start moving the

telescope the numbers will start updating.

Continue to move until both numbers are

close to 0s:

Nexus DSC Quick Setup Guide

key again and then press

If you look through the eyepiece then you will

see NGC55 there now.

To display additional information about the

object just press

Pressing

back to the previous screen.

Please refer to the Nexus DSC User

Manual for advanced topic on objects'

selection.

Using Nexus DSC with

SkySafari

If your Nexus DSC has the optional WiFi card

then you can connect it to SkySafari Plus/Pro

running on iOS, Android or Mac OS X. The

following steps describe how to set everything

up on iPhone but the procedure is very similar

for Mac OS X and Android.

Nexus DSC setup

Please go to the top menu on Nexus DSC and

select Settings and then WiFi:

Make sure that WiFi Mode is set to Access

Point:

Press

until the second page of setting

appears and make sure that Protocol is set to

LX200:

key:

will take you

ESC