ASTRO DEVICES Nexus DSC Pro 빠른 설정 매뉴얼 - 페이지 8

{카테고리_이름} ASTRO DEVICES Nexus DSC Pro에 대한 빠른 설정 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. ASTRO DEVICES Nexus DSC Pro 13 페이지.

Now select a star and point the telescope at the

selected star. Betelgeuse was selected in this

example. The telescope cursor will most likely

be quite far from the selected star unless the

telescope is levelled and pointing north when

the altitude reference was performed. The

telescope cursor does not have to be over the

selected star:

Once the star is precisely in the centre of the

field of view touch the Align button. A popup

window will appear to confirm the alignment:

Nexus DSC Pro Quick Setup Guide

Touch the Align button to confirm. Nexus DSC

Pro will produce a short beep if sounds are

enabled. The telescope cursor will now be

located precisely over the selected star:

Select another star and perform the same

procedure for the second star.

You can check if the alignment was successful

by going to Alignment Status.

Alignment object screen

Alignment object screen has four tabs:

CATALOGUE, OBJECT, INFO and HELP. You

can use

and

the tabs. The OBJECT tab is selected by

keys to switch between