Doran 2200 Series 운영자 매뉴얼 - 페이지 5

{카테고리_이름} Doran 2200 Series에 대한 운영자 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Doran 2200 Series 15 페이지.

Unpacking Your Scale

Before unpacking your Doran scale, please read the instructions in this section. Your

new scale is a durable industrial product, but it is also a sensitive weighing instrument.

Normal care should be taken when handling and using this product. Improper handling

or abuse can damage the scale and result in costly repairs that will not be covered by

the warranty. If you notice any shipping damage, notify the shipper immediately. Please

observe the following precautions to insure years of trouble free service from your new

scale.

DO NOT drop the scale

DO NOT immerse the scale

DO NOT drop objects on the platform

ONLY pick up the scale base from the bottom of the platform

CAREFULLY remove the scale from the shipping carton

Electrical Connections

Prior to connecting your scale to power, check the serial number tag on the back of

scale for the correct operating voltage. Verify that the power matches the rated voltage.

Be sure the AC power is not excessively noisy - this can occur if large inductive loads,

such as solenoids or motors, are on the same power line. The scale has a filtered power

supply to reduce the effects of normal line noise, but they cannot limit severe

fluctuations. If problems occur, noise producing devices may have to be suppressed to

minimize their effect.