Canon FORMULA CR-80 설치 매뉴얼 - 페이지 18

{카테고리_이름} Canon FORMULA CR-80에 대한 설치 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Canon FORMULA CR-80 21 페이지. Check reader
Canon FORMULA CR-80에 대해서도 마찬가지입니다: 브로셔 및 사양 (26 페이지), 운영 및 유지보수 매뉴얼 (24 페이지)

페이지 인쇄

IMPORTANT

Make sure that the ink cartridge lock lever locks the ink cartridge

into the correct position.

Ink Cartridge Lock Lever

Squeeze the Print Position Adjustment Lever and move it

to adjust the print position.

Top:

50.5 mm (1.99") from the bottom edge of the document

Middle:

47 mm (1.85") from the bottom edge of the document

Bottom:

43.5 mm (1.71") from the bottom edge of the document

If the cartridge does not

load properly, see step 7.

If the ink head drops back when installed, the two ink cartridge

pins will not fit into the holes on the carriage. Push back the ink

cartridge lock lever a in the direction of the arrow and reset the

cartridge in the correct position b.

Carefully replace the Imprinter Cover.

Gently close the Maintenance Cover until it clicks into

place.

Ink Cartridge

Holes

Pins