Canon FORMULA CR-80 운영 및 유지보수 매뉴얼 - 페이지 7

{카테고리_이름} Canon FORMULA CR-80에 대한 운영 및 유지보수 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Canon FORMULA CR-80 24 페이지. Check reader
Canon FORMULA CR-80에 대해서도 마찬가지입니다: 설치 매뉴얼 (21 페이지), 브로셔 및 사양 (26 페이지)

Canon FORMULA CR-80 운영 및 유지보수 매뉴얼

Placing Documents

Note the following points when placing documents on the scanner.
• Place the front of the document toward you.
• A maximum of 50 documents or a document stack no higher
than 5 mm (0.2") can be loaded at one time.
• Move the stopper to the edge of the document in the document
tray in accordance with the document. Otherwise, this may
cause a paper eject error.
• When scanning multiple documents, sort them into batches of
uniform paper quality and thickness and load each batch
separately. Note that loading mixed batches may cause paper
jams.
• When scanning relatively thick (0.15 mm to 0.2 mm (0.005" to
0.008") documents, the feeding process may cause the
document to curl and cause paper jams at the document feed
opening. For such documents, load no more than 10 sheets at
one time.
IMPORTANT
Align the documents and set the bottom of the documents level in the
document tray.

Document Feeding and Scanning

This section describes how to load and scan documents.
CAUTION
• Avoid wearing loose fitting clothing, dangling jewelry, long ties,
or long hair that could become entangled with moving parts,
especially the rollers that feed paper through the scanner. If
such objects become entangled, immediately disconnect the
power plug from the power outlet.
• Check the paper stack and remove all clips, staples, pins, or
any other type of metal or plastic fastener. These objects may
cause damage to the document, a paper jam, or a scanner
malfunction.
• Do not touch documents that are being fed under any
circumstances. The documents that are being fed may cut your
hand.

Scan Procedure

1
Pull out the document feed tray.
2
Carefully align the edges of the document.
7