Canon ImageCLASS MF4270 시작 설명서 - 페이지 13

{카테고리_이름} Canon ImageCLASS MF4270에 대한 시작 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Canon ImageCLASS MF4270 36 페이지. Canon all in one printer user manual
Canon ImageCLASS MF4270에 대해서도 마찬가지입니다: 시작 설명서 (38 페이지)

페이지 인쇄
Canon ImageCLASS MF4270 시작 설명서

Set the Date and Time

Before using the machine, you MUST set the current date and time. The current date and time settings are used as
standard timer settings for functions that require them.
Entering Information
●
Numeric keys: Enters numbers.
‒
[
] or [
]: Moves the cursor position.
‒
[OK]: Confirms the entry.
‒
1
Press [Additional Functions].
2
Press [
] or [
] to select <9 TIMER
SETTINGS>, then press [OK].
3
Press [
] or [
] to select <1 DATE&TIME
SETTING>, then press [OK].
4
Use the numeric keys to enter the date (month/
day/year) and time (in 24-hour/military time
format), then press [OK].
Ex.
D A T E & T I M E
S E T T I N G
1 5 : 5 0
1 2
3 1
If you accidently enter an incorrect number, press [
[
] to move the cursor to the number that needs
correcting and overwrite it.
´ 0 7
] or
5
Press [Stop/Reset] to return to the standby
mode.
–
You can select one of the following three date formats in
<2 DATE TYPE SELECT>.
–
<MM/DD/YYYY>
–
<DD/MM YYYY>
–
<YYYY MM/DD>
–
By default, <4 DAYLIGHT SV.TIME> in the <9 TIMER
SETTINGS> menu is set to <OFF>.
If you want to set <4 DAYLIGHT SV.TIME> in the <9 TIMER
SETTINGS> menu to <ON>, see Chapter 1, "Before Using
the Machine, " in the Basic Operation Guide.
The LCD display turned off:
●
The machine may enter the sleep mode while you are
setting up the machine. Press [Energy Saver] to turn the
machine back on and continue the setup.
Set Up the Machine
11