Canon ImageCLASS MF4270 시작 설명서 - 페이지 20

{카테고리_이름} Canon ImageCLASS MF4270에 대한 시작 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Canon ImageCLASS MF4270 38 페이지. Canon all in one printer user manual
Canon ImageCLASS MF4270에 대해서도 마찬가지입니다: 시작 설명서 (36 페이지)

페이지 인쇄

1. Network Connection

Set the Machine for Receiving Faxes

Select the Receive Mode that Suits Your Needs

The receive mode determines how the machine responds to incoming faxes and voice calls. Select the mode

which is most suitable for you from the chart below. For details, see "About the Receiving Modes, " on p. 19.

–

The remote reception function is useful when the receive mode is set to <MANUAL> and connected to an external telephone.

You can receive faxes by picking up the external telephone and pressing a two-digit remote reception ID (the default setting is

25). For details, see Chapter 4, "Sending and receiving" in the Reference Guide.

–

Your telephone with built-in answering machine or answering machine must be connected directly to the machine for

<AnsMode> to work. (See "Connect Telephone Cables, " on p. 13.)

–

The external telephone must be connected to the machine for <FaxTel> or <MANUAL> to work. (See "Connect Telephone

Cables, " on p. 13.)

–

By default, <FaxOnly> is selected in <1 RX MODE>. If external telephone is connected to the machine and receives a fax or voice

call, the external telephone rings. You can answer the voice call while the external telephone is ringing.

For incoming ring to be disabled, press [Additional Functions] → <6 FAX SETTINGS> → <4 RX SETTINGS> → <2 INCOMING RING>

then select <OFF>.

–

Voice mail is not supported with <AnsMode>.

–

The <NET SWITCH> mode is available for certain countries only and requires subscription to a network switch service. Contact

your telephone company for availability.

Set the Receive Mode

Press [Additional Functions].

Press [

] or [

SETTINGS>, then press [OK].

Press [

] or [

then press [OK].

Press [

] or [

mode, then press [OK].

] to select <6 FAX

] to select <1 RX MODE>,

] to select the receive

Press [Stop/Reset] to return to the standby

mode.

The LCD display turned off:

●

The machine may enter the sleep mode while you are

setting up the machine. Press

the machine back on and continue the setup.

[Energy Saver] to turn