Doran Scales DS4100 사용 설명서 - 페이지 10

{카테고리_이름} Doran Scales DS4100에 대한 사용 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Doran Scales DS4100 18 페이지. Infant scale

Multiple Point Calibration

Use this calibration procedure when a full set of calibrated weights is available.

This calibration sequence will result in the most accurate calibration possible.

CAUTION: Calibrating this scale improperly will void the warranty and will require

field service or return of the scale to the factory.

1. Turn the scale on by pressing the ON/OFF button.

2. To calibrate in pounds, press LB. To calibrate in kilograms, press KG.

3. Press and hold ZERO and REWEIGH simultaneously.

4. When the display reads Cal 25 lb (CAL10 kg), release ZERO and REWEIGH.

5. Press and hold the LB button until the display reads CALSP.

6. Press KG and the display will read CAL 0.

7. Remove all weight from the scale.

NOTE: During calibration be sure vibration and air currents are not present.

8. Press LB. The display will count down to zero. The counter will reset if too

much vibration is present.

9. Once the zero calibration is successful, the display will read 10 lb (5 kg).

10. Place 10 lb (5 kg) on the scale and press LB.

11. When successful, the display will read 20 lb or 10 kg.

12. Place 20 lb (10 kg) on the scale and press LB.

13. When successful, the display will read 30 lb or 15 kg.

14. Place 30 lb (15 kg) on the scale and press LB.

15. When successful, the display will read 40 lb or 20 kg.

16. Place 40 lb (20 kg) on the scale and press LB.

17. When successful, the scale will return to the weigh mode.