Astro Machine AstroJet M1C 빠른 시작 매뉴얼 - 페이지 3

{카테고리_이름} Astro Machine AstroJet M1C에 대한 빠른 시작 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Astro Machine AstroJet M1C 6 페이지.
Astro Machine AstroJet M1C에 대해서도 마찬가지입니다: 빠른 참조 (2 페이지)

페이지 인쇄

6. Connect Device Now. Switch Printer ON and

Don't click on either

connect USB cable.

button.

Software will finish installing.

7. Finished software installation. Do not check

"Print Test Page" as Printer is not set up yet.

You can check "Set this printer as the default

printer" at this time. To complete process, restart

computer. Click "Reboot".

Step 5

Install Ink Tanks

Printer uses one Printhead Cartridge and five Ink Tanks

(two Black, one Cyan, one Magenta, and one Yellow).

1. Open Printer Toolbox. Go

to Start Menu, then open

Printer "Toolbox". System

Status information is in

upper left corner of User

Interface window. Note that

Ink Level "CKMYK" boxes

are empty.

2. Click "Replace Ink Tanks"

on User Interface screen. Once "Confirm"

screen displays, it is safe to proceed.

IMPORTANT: DO NOT press "Continue" until

after you have installed Ink Tank(s) and

closed Ink Tank Latches.

3. Open Front Cover (hinged at bottom). Open

three Latches [A].

4. Remove Ink Tank(s) from packaging.

Page 3