Canon imageFormula CR-120 설정 및 운영 매뉴얼 - 페이지 8

{카테고리_이름} Canon imageFormula CR-120에 대한 설정 및 운영 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Canon imageFormula CR-120 16 페이지.

Connecting the Power Cord

Connect the power cord.

Make sure to use only the power cord provided with the scanner.

WARNING

When connecting the power cord, follow these precautions. Failure to do so may

cause a fire or electrical shock.

• Never grasp the power plug when your hands are wet.

• Never plug the scanner into a multiplug power strip.

• Never bundle or tie the power cord around itself or another object. Connect the

power plug securely into the power outlet.

• Use only the power cord and power plug provided with the scanner.

• Connect only to a power outlet of the rated voltage and power supply

frequency (either 100-120 V, 60 Hz or 220-240 V, 50/60 Hz, depending on your

region).

• Do not plug the scanner into a power outlet shared with another device. If you

use an extension cord, make sure that the extension cord is rated for the

current requirements of the scanner.

Follow the procedures below to turn the scanner power ON and OFF.

Turning ON the Power

To turn ON the scanner, press the Power Button.

When you turn ON the power, the Power Button flashes slowly and then

turns solid blue.

IMPORTANT

If the scanner does not work, or the power LED continues to flash, there is a problem

with the scanner. Turn OFF the power, and contact your local authorized Canon

dealer or service representative to have the scanner serviced.

WARNING

If you hear strange sounds, detect smoke or abnormal heat, sense a vibration,

or smell odd odors around the scanner, turn OFF the power immediately and

disconnect the power cord from the power outlet. Contact your local authorized

Canon dealer or service representative to have the scanner serviced.