Canon imageFORMULA CR-50 운영 및 유지보수 매뉴얼 - 페이지 11
{카테고리_이름} Canon imageFORMULA CR-50에 대한 운영 및 유지보수 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Canon imageFORMULA CR-50 24 페이지. Check reader
Canon imageFORMULA CR-50에 대해서도 마찬가지입니다: 설치 매뉴얼 (21 페이지)
페이지 인쇄
The Scanner Does Not Turn ON
Check the following conditions, and take the appropriate action.
The power switch is not in the ON position.
Turn the switch into the ON position. (See "Turning ON the Power"
on p. 14 in Installation Guide.)
The power cord is not connected into a power outlet.
Connect the power cord into a power outlet. (See "Connecting the
Power Cord" on p. 14 in Installation Guide.)
Feeding Trouble
If the document is not fed properly or the detection functions do not
work properly, remedy the problem by checking the following
conditions.
Condition
A paper jam has occurred.
Cause and
• Check to make sure that the size and thickness of the
Remedy
document are within the supported range of the
scanner, and if the quality of the paper is appropriate.
For cautions on handling documents, see
"Documents" on p. 6.
• Documents with rough surfaces may cause a paper
feed error to occur.
• Dirty or worn rollers inside the scanner may cause a
paper jam.
Clean the rollers if they are dirty. (See "Cleaning the
Scanning Glass and Rollers" on p. 13.) Worn rollers
must be replaced. Contact your local authorized
Canon dealer or service representative to have the
scanner serviced.
• The Separation Roller gap is too wide. Adjust the
Separation Roller gap. (See "Adjusting the Separation
Roller Gap" on p. 21.)
Condition
A double feed error often occurs.
Cause and
A double feed error may occur when documents with
Remedy
different thicknesses are mixed.
If the above-mentioned method is not effective or you
are using the CR-50/80 scanner, adjust the Separation
Roller gap. (See "Adjusting the Separation Roller Gap"
on p. 21.)
11