Canon imageFORMULA DR-2010M Workgroup Scanner 참조 매뉴얼 - 페이지 3

{카테고리_이름} Canon imageFORMULA DR-2010M Workgroup Scanner에 대한 참조 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Canon imageFORMULA DR-2010M Workgroup Scanner 36 페이지. Mac os x
Canon imageFORMULA DR-2010M Workgroup Scanner에 대해서도 마찬가지입니다: 브로셔 및 사양 (33 페이지)

페이지 인쇄

Setup Guide

Although this manual uses the DR-2510M in the descriptions, DR-2010M operations are identical. If you are using the DR-2010M, please read

"DR-2010M" in place of "DR-2510M."

Checking the Accessories

If any of the items listed below are missing or damaged, contact your local authorized

Canon dealer or service representative.

DR-2010M/DR-2510M

Feed Roller

Reference Guide

Registration Card

(this document)

(U.S.A and Canada only)

Third-Party Software

The following software is included on the supplied Setup disc.

● Presto! BizCard

Business card management software from NewSoft Technology Corp.

Run the following installer from the Setup disc to install.

➜ BizCard/BCRInstaller

Remove the scanner from the box, and remove the orange tape and protective sheets (▼) from the scanner.

Please read first.

• Items included in this manual are subject to change

without notice.

• You must keep the machine's packaging and packing

materials for storing or transporting the machine.

USB Cable Type A/Type B

AC Adapter/Power Cord

(Length: 1.8 m)

(Connected length: 2.6 m)

Warranty Card

Setup Disc

(U.S.A and Canada only)

● Presto! PageManager

Photo and document management software from NewSoft Technology

Corp.

Run the following installer from the Setup disc to install.

➜ PageManager/PM8Installer

* Presto! BizCard is a registered trademark of NewSoft Technology Corp.

Installing the Feed Roller

Slide the document guides to the left

Lift the roller fixing lever a, and slide it to the left b.

and right, and open the roller cover.

Document

guides

Roller cover

Insert the feeding roller and align the

Slide the roller fixing lever to the right and insert it into the hole on the left of

the feeding roller a. Lower the roller fixing lever to secure the shaft of the

notch on the roller with the shaft on

the unit.

feeding roller b.

Close the roller cover. It is properly

Gently press on the sides of the front

closed when you hear a click.

unit to close it. It is properly closed

when you hear a click.

Roller fixing lever

☞

Continued on back side