Canon imageFORMULA DR-2010M Workgroup Scanner 참조 매뉴얼 - 페이지 30

{카테고리_이름} Canon imageFORMULA DR-2010M Workgroup Scanner에 대한 참조 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Canon imageFORMULA DR-2010M Workgroup Scanner 36 페이지. Mac os x
Canon imageFORMULA DR-2010M Workgroup Scanner에 대해서도 마찬가지입니다: 브로셔 및 사양 (33 페이지)

페이지 인쇄

Appendix

Replacing Consumables

The scanner's Feed Roller and the Retard Roller are both

consumables. They are subject to gradual wear during scanning. As

the rollers wear, documents will eventually no longer feed properly,

and paper jams will result.

When the Roller Count (the total number of document sheets fed

through the rollers) reaches 100,000, a message appears upon

computer startup requesting roller replacement.

When this message appears, obtain a replacement roller kit and

replace the consumables with those supplied in the kit (the two roller

assemblies and the document pressure guide).

When replacing the rollers, reset the Roller Count in the scanner.

Opening and Closing the Front Unit

To open the front unit, squeeze the OPEN levers together

and lift it up and forward.

Hint

Replaceable consumables are located as shown below.

Close the front unit by pressing both sides gently

downwards until the latches click.

Retard Roller and

Document Pressure

Guide (in the Front Unit)

Feed Roller