Canon imageFORMULA DR-2050C 간편한 시작 매뉴얼

{카테고리_이름} Canon imageFORMULA DR-2050C에 대한 간편한 시작 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Canon imageFORMULA DR-2050C 2 페이지. Canon dr-2050c; dr-2050sp document scanner
Canon imageFORMULA DR-2050C에 대해서도 마찬가지입니다: 브로셔 및 사양 (16 페이지), 브로셔 및 사양 (4 페이지), 브로셔 및 사양 (4 페이지), 브로셔 및 사양 (4 페이지), 포켓 매뉴얼 (32 페이지), 사양 (4 페이지), 브로셔 및 사양 (16 페이지), 유지 관리 매뉴얼 (22 페이지)

페이지 인쇄

Document Scanner DR-2050C/SP

Easy Start Guide

Thank you for purchasing the Canon DR-2050C/DR-2050SP Document Scanner. This Easy

Start Guide describes the procedure for setting up the scanner for use. Follow the

procedures outlined in this Easy Start Guide to set up the scanner. Details on using the

scanner are described in the User's Guides packaged with the scanner. Before you use the

scanner, make sure to thoroughly read the User's Guides.

Checking the Accessories

When you unpack your scanner, make sure that it contains all of the following accessories. If

any of the items listed below are missing or damaged, contact your local authorized Canon

dealer or service representative.

USB Cable

DR-2050C/DR-2050SP

Feed Roller

Type A/Type B

AC Adapter/Power Cord

(Length: 6 ft. (1.8 m))

(Connected length: 8 ft. 6 in. (2.6 m))

Document

Easy Start Guide

DR-2050C/DR-2050SP

Adjustment Sheet

Guide Adapter

(this document)

User's Guide

0880281099-L5T1P7-BR01

6 3 9 0

C A N O N

D I X I E

C A N A D A

R D

I N C .

M I S S I S S A U G A

O N

L 5 T

9 Z 9

DR-2050C

Adobe Acrobat

Warranty Card

Registration Card

Setup Disc

(U.S.A. and Canada only)

*For the DR-2050SP, the following accessories are included in addition to the above items.

DR-2050SP User's Guide

RGB Cable

Remote Control

AAA Batteries (2)

Presentation Mode Edition

Mini D-sub 15 Pin

(Length: 5 ft. (1.5 m))

Note

To use the feed roller, install it on the scanner.

[STEP 2] "Removing the Packing Materials and Installing the Feed Roller"

Documents can be prevented from feeding slantwise by installing the document

guide adapters on the document guides. (

STEP 5)

The adjustment sheet is used to adjust the scanner when anomalies begin to

appear in scanned images. Store it in a safe place where it will not be lost.

The DR-2050 Setup Disc contains the "DR-2050C Scanner Driver",

"CapturePerfect 3.0", and "OmniPage SE" made by Nuance Communications Inc.

DR-2050C/DR-2050SP User's Guide p.17 "About the Setup Disc"

Items included in this package are subject to change without notice.

You must keep the machine's packaging and packing materials for storing or

transporting the machine.

After checking the package contents, you need to prepare the scanner

for use. (

STEP 2)

Removing the Packing Materials and

Installing the Feed Roller

Remove the scanner from the box, remove the orange tape and protective sheets from the

scanner, and install the feed roller on the scanner body.

Peel off the four pieces of orange tape from the outer casing.

Open the document feed tray and remove the protective sheet.

PUB. CE-IE-546

Open the front cover at (1 1 1 1 1 ) and (2 2 2 2 2 ), and remove the orange tape fastening the

roller cover.

Open the roller cover.

Lower the roller lock lever (1 1 1 1 1 ), and slide it towards the left (2 2 2 2 2 ).

Load the feed roller, align the notch on the roller with the shaft on the scanner

body.

Slide the roller lock lever towards the right, fit the lever feed roller into the hole on

the left of the roller (1 1 1 1 1 ), and push down the roller lock lever to lock the feed roller

shaft (2 2 2 2 2 ).

Close the roller cover. Make sure that the roller cover clicks into place.

Gently push in the front unit on its left and right sides to close the front unit.

Make sure that the front unit clicks into place.

10.

Close the document feed tray and top cover.

Document Feed Tray

Top Cover

The scanner is now ready for use.

Next, you need to install the scanner software. (

Trademarks

• Canon and the Canon logo are registered trademarks of Canon Inc. in the United States and may also be

trademarks or registered trademarks in other countries.

• Microsoft Windows

is a registered trademark of Microsoft USA in the United States and other countries.

• Other brands and product names used in this manual may be trademarks or registered trademarks of their

respective companies.

Installing the Software

Install the software before connecting the scanner to the computer.

Warning

Before installing the software, make sure your computer is correctly running one of

the following versions of Windows. For details, refer to the DR-2050C/DR-2050SP

User's Guide.

• Windows 98SE

• Windows Me

• Windows 2000 Professional SP4 or later

• Windows XP Home Edition SP2 or later

• Windows XP Professional SP2 or later

Do not connect the scanner to the computer before installing the software. If you

connect the scanner and turn it ON before you install the software, a wizard screen

will appear. If this wizard appears, click [Cancel] to exit the wizard, and then turn

the scanner OFF.

Wizard Screen (Windows 2000)

Be sure to log on with administrator privileges when logging on to Windows.

Close all other applications before installing the software.

Turn ON your computer.

Insert the DR-2050C Setup Disc into the

PC's CD-ROM drive.

The setup wizard automatically starts up

when you insert the CD-ROM into the CD-

ROM drive. If the setup wizard does not

start up, execute setup.exe in the CD-ROM.

Click [Typical Installation].

If you click [Typical Installation], all of the

software is installed. If you want to select

which parts of the software to install, click

[Custom Installation].

Click [Install].

All of the currently displayed software is

installed. To install only selected software,

click [Back] and select [Custom

Installation].

Click [Next].

Read the software license agreement, and

click [Yes] if you consent to the conditions of

the software.

Installation of the scanner driver starts.

During scanner driver installation, the

scanner driver and the Job Registration

Tool are installed.

STEP 3)

Click [Finish] to complete the installation.

Next, the installation wizard for

CapturePerfect 3.0 appears.

Click [Next].

Read the software license agreement, and

click [Yes] if you consent to the conditions of

the software.

10.

Check the destination folder and click [Next].

Installation of CapturePerfect 3.0 starts.

11.

Click [Finish] to complete the installation of

CapturePerfect 3.0.

12.

Next, installation of OmniPage SE starts.

Follow the messages on the screen to

proceed with the installation.

13.

When all installations are complete, the

Installation completed screen appears.

Click [Exit] to exit the installer.

(Click [Back] to return to the menu screen.)

14.

Remove the setup disc, and finish the

software installation.

Note

When software is installed the icons are added to the Program menu.

(Windows 2000)

This completes the software installation.

Next, you need to connect the scanner to your computer. (

STEP 4)

Continued on back side