Canon imageFORMULA DR-2050SP 유지 관리 매뉴얼 - 페이지 7

{카테고리_이름} Canon imageFORMULA DR-2050SP에 대한 유지 관리 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Canon imageFORMULA DR-2050SP 22 페이지. Canon dr-2050c; dr-2050sp document scanner
Canon imageFORMULA DR-2050SP에 대해서도 마찬가지입니다: 간편한 시작 매뉴얼 (2 페이지), 브로셔 및 사양 (26 페이지), 브로셔 및 사양 (16 페이지), 브로셔 및 사양 (4 페이지), 브로셔 및 사양 (4 페이지), 브로셔 및 사양 (4 페이지), 포켓 매뉴얼 (32 페이지), 브로셔 및 사양 (16 페이지)

2. Removing and Attaching the Rollers

Follow the relevant procedure to remove and attach the feed roller and retard

roller when you clean or replace them.

IMPORTANT

Feed rollers are consumable parts. When the rollers start to wear out, paper

jams and misfeeds may occur more often. When this happens, buy an exchange

roller kit, and replace the feed roller and the retard roller.

CAUTION

Do not use excessive force when removing or attaching the

rollers. Doing so may damage them.

When the number of pages scanned exceeds 30,000, a roller replacement

message will appear when the computer is started. When you are using the

DR-2050SP in the Presentation mode, a message prompting you to change the

rollers is displayed after the opening screen when the scanner's power is turned

ON. Buy an exchange roller kit, and replace the feed roller and the retard

roller.

IMPORTANT

• If misfeeds happen often, check the rollers for wear, and replace them if

necessary before the message is displayed.

• Be sure to reset the counter after replacing the rollers. (See "Resetting the

Counter," on p. 63.)

• Contact your local authorized Canon dealer or service representative for

information about the exchange roller kit (feed roller and retard roller).

Appendices

When using the DR-2050SP in Presentation mode