Flying Industry Development C-2 빠른 매뉴얼

{카테고리_이름} Flying Industry Development C-2에 대한 빠른 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Flying Industry Development C-2 2 페이지. Rf wireless remote control radio controller / transmitter & receiver
Flying Industry Development C-2에 대해서도 마찬가지입니다: 빠른 매뉴얼 (2 페이지), 빠른 매뉴얼 (2 페이지), 빠른 매뉴얼 (2 페이지)

페이지 인쇄
Flying Industry Development C-2 빠른 매뉴얼
RF Wireless Remote Control Radio Controller with Delay Time Function / Transmitter & Receiver
Package Include:
1 x Receiver: S1UD-DC06 / S1UD-DC09 / S1UD-DC12 / S1UD- DC24 (1 Channel / Three Control Modes)
2 x Transmitter: C-2
1 x User manual
Feature:
Wireless control, easy to install
Setting delay time from 0 to 99 seconds.
Control Lights, Motors, Fans, electrically operated Doors/Locks/Windows/Blinds/Cars or Other Appliances w ith voltage AC110~240V or
DC0~28V.
You can turn on/off the recei v er with transmitter (remote control) from any place w ithin a reliable distance; the w i r eless RF signal can pass
through walls, floors and doors.
With characteristics of reverse power protection.
Use an 8-bit microcontroller w i t h low -power and high-speed CMOS technology.
Reliable control: The transmitter (Encoding) and the receiver (Decoding) use an 8-bit code.
One/ several transmitters can control one/ several receivers simultaneously.
If you use two or more receivers in the same place, you can set them w ith different c odes.
Transmitting Frequency: 315MHz / 433MHz
Receiver:
Model No.: S1UD-DC06 / S1UD-DC09 / S1UD- DC12 / S1UD-DC24
Channel: 1 CH
Control Modes: Toggle, Momentary, Latched
Delay time: 0~99 seconds
Coding Type: Fixed code or Learning code
Coding Setting: By learning
Pow er Supply (Operating Voltage): DC6V (S1UD-DC06), DC12V± 1V (S1UD-DC12), DC9V± 1V (S1UD-DC09), DC24V±2V (S1UD-DC24)
Working Voltage Range of Relay: AC110~240V or DC0~28V
Output: Relay output (Normally open and normally closed)
Maximum Working Current of Relay: 7A
PCB Size: 45mm x 30mm x 15mm
Case Size: 50mm x 35mm x 23mm
Receiver Sensitivity:-114dbm
Static Current: ≤10mA
Transmitter:
Model No.: C-2
Channel: 2 CH
Remote Control Distance: 100m / 300ft (theoretically)
Encode: Fixed code by soldering
Unit size: 58mm x 39mm x 16mm
Pow er Supply: 1 x 23A -12V battery (included, can be used for 12 months)
Usage:
Initial state: Terminals A, B = Normally Closed; Terminals B, C = Nor mally Open.
Connect device to terminal "B & C"; connect power suppl y to terminal "+" and "-".
Setting different control modes (We have set the receiver as Toggle control mode before delivery. If you want to use other control modes, do as
follow ing operation):
Setting control mode Toggle: Connect Jum per-2 and Jumper-3.
Control mode Toggle: Press -> On; Press again -> Off.
Press button 1: Turn on the relay (connect B and C, disconnect A and B)
Press button 1 again: Turn off the relay (disconnect B and C, connect A and B)
If you set delay time, such as 30 seconds:
Press button 1: Turn on the relay (connect B and C, disconnect A and B)
After 30 seconds, Turn off the relay automatically (disconnect B and C, connect A and B). Or press button 1 again within 30 seconds: Turn off the
relay immediately.
Setting control mode Momentary: Disconnect Jumper.
Control mode Momentary: Press and hold -> On; Release -> Off.
Press and hold button 1: Turn on the relay (connect B and C, disconnect A and B)
Release button 1: Turn off the relay (disconnect B and C, connect A and B)
If you set delay time, such as 20 seconds:
Press and hold button 1: Turn on the relay (connect B and C, disconnect A and B)
After 20 seconds, Turn off the relay automatically (disconnect B and C, connect A and B). And the relay couldn't be turned off by pressing any
button w ithin 20 seconds.
SHENZHEN GUIYUAN INDUSTRY DEVELOPMENT CO.,LTD
Http://www.carymart.com