Coil Audio CA-286 설치 매뉴얼 및 운영 지침 - 페이지 4

{카테고리_이름} Coil Audio CA-286에 대한 설치 매뉴얼 및 운영 지침을 온라인으로 검색하거나 PDF를 다운로드하세요. Coil Audio CA-286 8 페이지.

INSPECT PACKAGE CONTENTS

All CA-286 modules are carefully packed for shipment to insure a safe arrival.

However, if there is any damage, contact Coil Audio immediately and keep any and

all shipping materials for use during any possible damage claims with the shipper.

Included in the Package are:

(1) CA-286 module

(1) 1 -3 input/output transformers depending on order

(1) Guide Bracket hardware set for PS-6 Tray that includes:

-(4) GUIDE BRACKET plates (two short/two long)

-(4) 3/8" #6-32 Stainless Steel Screws w/Lock-Nuts

-(2) Fender Washers

-(2) Module Thumbscrews

GUIDE BRACKETS MUST BE INSTALLED BEFORE INSTALLING MODULES IN

THE RACK TRAY

For guide bracket and module installation please see P a g e s 3 - 4 o f the "PS6 Rack

and Power Installation and Operating Manual"

CHANGING TRANSFORMERS

Before inserting modules into the rack tray, make

sure both your input and output transformers are

firmly seated into the module body. Never plug or

unplug transformers while the module is plugged in

and powered on.

Each octal plug has a guide pin to ensure proper

orientation, refer to the adjacent picture for

placement. The front octal socket is for the input

transformer (such as CT-110 or CT-100HN). The rear

octal is for the output transformer (CT-41).