Canon imageFORMULA DR-M160II 서비스 매뉴얼 - 페이지 16
{카테고리_이름} Canon imageFORMULA DR-M160II에 대한 서비스 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Canon imageFORMULA DR-M160II 36 페이지.
페이지 인쇄
H.
Consumable Parts (End-User)
Consumable parts are defined as those parts having a limited yield that will
be reached during a customer's specific machine operation and should be
replaced as needed. Examples of consumable parts may include but are not
limited to feed rollers, separation rollers, etc. The consumable parts provided
below show an estimated yield to assist in the initial parts/supplies planning.
Note: All consumable parts shown in the below table are for reference
purposes only and are subject to change without notice.
Table 12 – Consumable Parts
Description
Feed roller
Retard roller
2
Item Numbers and Part Numbers are subject to change due to engineering changes, etc.
I.
Recommended Replacement Parts
Canon USA recommends that a dealer keep the following parts in stock for
replacement purposes in case of a hardware failure.
Table 13 – Recommended Replacement Parts
Description
Control PCB
Sub PCB
Upper Reading Unit
Lower Reading Unit
Upper Reading Guide
Lower Reading Guide
Feed motor
Main motor
AC adapter
2
Item Numbers and Part Numbers are subject to change due to engineering changes, etc.
5
Estimated average values in the field, based on the number of sheets separated, not the size of the sheets scanned. Data is
subject to change depending upon many factors including, without limitation, environment, and customer handling of the
scanner equipment.
imageFORMULA DR-M160II Service Guide
Expected Life
2
Item Number
(sheets)
MG1-4985-000
200,000
MG1-4620-010
200,000
2
Item Number
Quantity
MG1-4995-000
MG1-4601-000
MG1-8308-000
MG1-8309-000
MF1-4733-000
MF1-4734-000
MH7-1174-000
MH7-1173-000
MG1-4558-000
imageFORMULA DR-M160II Service Guide
5
Remarks
Because of the worn rollers, it
is necessary to replace when
feed errors occur after
cleaning.
Remarks
1
1
1
1
Includes reading guide
1
A reading glass attached
1
1
1
1
June 2014
Page 11