Canon imageFORMULA P- 참조 매뉴얼 - 페이지 24

{카테고리_이름} Canon imageFORMULA P-에 대한 참조 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Canon imageFORMULA P- 26 페이지. High-speed document scanners
Canon imageFORMULA P-에 대해서도 마찬가지입니다: 포켓 매뉴얼 (32 페이지)

Canon imageFORMULA P- 참조 매뉴얼
Close the feeder cover.
24

Resetting the Counters

Make sure to reset the scanner's internal counters using the following
procedure whenever you replace the feed roller and separation pad.
IMPORTANT
If you only use CaptureOnTouch Lite and have not installed
CaptureOnTouch and the scanner driver on your computer, you cannot reset
the counter using the following procedure. In this case, you can reset the
counter from CaptureOnTouch Lite. Refer to the User Guide for details.
Start Windows and log on as a user with administrator
privileges.
Set the Auto Start switch at the rear of the scanner to OFF.
Connect the scanner to the computer.
Open the feed tray to turn the scanner ON.
Click [Start], [All Programs], [Canon P-150], and then click
[Utility].
The Canon imageFORMULA utility starts.
Select [Canon P-150 USB], and click [Properties].
The scanner's properties appear.