Canon iR1018 설치 절차 - 페이지 18

{카테고리_이름} Canon iR1018에 대한 설치 절차을 온라인으로 검색하거나 PDF를 다운로드하세요. Canon iR1018 20 페이지. Ir1018/1022 series ir2018/2030 series
Canon iR1018에 대해서도 마찬가지입니다: 브로셔 및 사양 (8 페이지), 서비스 매뉴얼 (29 페이지)

페이지 인쇄

Chapter 1　

1.1.4

Registering

Card IDs

/ / / / iR1018 / iR1018J / / iR1022A / iR1022F /

iR1022i / iR1022iF /

After installing the card reader-E1, register the card

numbers to be used in the service mode of the iR body.

If they are not registered, cards will not be recognized

when inserted.

1) Plug the power cord into the outlet, and then turn on

the main power switch.

2) Press the following keys to display the service

mode screen:

Additional Functions Key > 2 Key > 8 Key > Addi-

tional Functions Key

3) Select "# ACC" using the + and - key, and then

press the OK key.

4) Select "CARD" using the + and - key, and then

press the OK key.

5) Specify the first ID number of the card ID numbers

to be registered, and then press the OK key.

Sequential Card ID numbers of 100 cards(*) are au-

tomatically registered in the department ID, starting

with the specified card ID number.

* Flash ROM 32MB model or When an optional

ROM is added, card ID numbers of 1000 cards are

registered.

6) Press the Additional Functions key to enter the user

mode.

7) Select "SYSTEM SETTINGS" using the + and -

key, and then press the OK key.

8) Select "MANAGE DEPT. ID" using the + and -

key, and then press the OK key.

9) Select "ON" using the + and - key, and then press

the OK key.

10) Turn main power switch off and on again. Check

that "INSERT CARD" appears.

the

0013-4623