Canon L1 설치 절차 매뉴얼 - 페이지 45

{카테고리_이름} Canon L1에 대한 설치 절차 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Canon L1 48 페이지.
Canon L1에 대해서도 마찬가지입니다: 사용 설명서 (37 페이지)

3) From the back of the front cover, remove the fixing

screw, and detach the spanners [I].

1) Open the front cover; then, from the back of the

front cover, remove the fixing screw, and detach the

spanners [I].

Adjusting the Height

1) Loosen the two fixing screws [ l ] each on the front

and rear casters on the pickup side of the finisher.

2) To increase the height of the finisher and the punch-

er unit, t u r n the adjusting bolt [2] in the direction of

the arrow A (A full

turn

of the adjusting bolt will in-

crease the height of the finisher by 1.75 mm.). Refer

to the index while turning the bolt, and perform this

for both front and rear casters.

3) To decrease the height of the finisher and the

puncher unit, t u r n the adjusting bolt [2] in the direc-

tion of the arrow B (A full

t u r n

of the adjusting bolt

will decrease the height of the finisher by 1.75

mrn.). Refer to the index while turning the bolt, and

perform this for both front and rear casters.