Canon Microfilm Scanner 500 사용 설명서 - 페이지 31
{카테고리_이름} Canon Microfilm Scanner 500에 대한 사용 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Canon Microfilm Scanner 500 48 페이지.
페이지 인쇄
6. Press the right arrow key again to switch to minute selection, and
press plus or minus to enter the set the minute.
Display
Setting
to
0 to 60
7. Press the right arrow again to enter position-select mode. You can
now select the location for the date stamp on the print. Press plus
or minus to set the value. The Print display indicates the current
setting, using the symbols shown below.
Display
Stamp location
Top left
Top center
Top right
Bottom left
Bottom center
Bottom right
8. Press the right arrow one last time to enter the format select mode.
You can now use the plus and minus keys to select the format for
the date stamp on the print. The Print display indicates the current
setting, using the numbers shown below.
Display Format
Year/Month/Day
Year/Month/Day Hr:Min 2000/08/28 21:15
Month/Year/Day
Month/Year/Day Hr:Min 08/28/2000 21:15
Day/Month/Year
Day/Month/Year Hr:Min 28/08/2000 21:15
Month Day Year
Month Day Year Hr:Min Aug 28 2000 21:15
Day-name Month
Day Year
Day-name Month Day
Year Hr:Min
9. When you have completed all settings, press the Reset key. The
MS500 registers the new values, and returns to normal operating
mode.
While making the date and time settings, you can move back to a
previous setting by pressing the left arrow key. When setting the
minute value, for example, you can press the left arrow key once
to move back to the hour setting.
27
SPECIAL FEATURES
Print Example
2000/08/28
08/28/2000
28/08/2000
Aug 28 2000
Mon Aug 28 2000
Mon Aug 28 2000 21:15