ASTRO TOOL Corp. ABOT4001 빠른 시작 매뉴얼

{카테고리_이름} ASTRO TOOL Corp. ABOT4001에 대한 빠른 시작 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. ASTRO TOOL Corp. ABOT4001 8 페이지. Battery powered crimp tool

ABOT4001 REV1

BATTERY POWERED CRIMP TOOL

Description

The "ABOT4001 rev1" is a handheld Battery Powered Crimp

tool. It uses dies engineered to meet the requirements of

the AS22520/40-01 and is intended to crimp insulated

terminals, splices, and endcaps manufactured to AS7928

(MIL-T-7928): AS25036 (MS25036), AS17143 (MS17143),

and AS25274 (MS25274).

This tool produces crimped assemblies that comply with the

IPC/WHMA-A-620-A Industry Guidelines for Stamped and

Formed-Closed Barrel-Insulation Support Crimps.

Safety

Safety is essential in the use and maintenance of Astro tools

and equipment. Observation of all safety information

provided in this manual, as well as any marking on the tool,

will avoid hazards and unsafe practices related to the use of

this tool.

________________________________________________________________________________________________

ABOT4001 rev1-DS

Astro Tool Corp.

21615 SW Tualatin-Valley Hwy. Beaverton, OR 97003

Phone: 503-642-9853 Fax: 503-591-7766 Email: [email protected]

Figure 1

Purpose of this Manual

This manual is intended to familiarize all personnel with the

safe operation and maintenance procedures for the following

Astro tool:

ABOT4001 rev1 Battery Powered Crimp Tool

Keep this manual available to all personnel. Replacement

manuals are available upon request at no charge.

All specifications are nominal and may change as

design improvements occur. Astro shall not be liable

for damages resulting from misapplication or misuse

of its products.

KEEP THIS MANUAL

Page 1 of 8

DATASHEET

REV. A

3/3/2016