Flying Scot Centerboard Cable 지침

{카테고리_이름} Flying Scot Centerboard Cable에 대한 지침을 온라인으로 검색하거나 PDF를 다운로드하세요. Flying Scot Centerboard Cable 2 페이지.

Please read all instructions before beginning. If you have any questions please call 1-800-864-7208 for

assistance.

Tip: The replacement of the centerboard cable is most easily done with the board down, at least partially, so

the cable is slack.

Removing Old Cable

1. While the cable is slack, lay under the portside of the foredeck and disconnect the shackle anchoring the

cable to the centerboard trunk

Note: Watch your hands as the cable will have broken strands

2. Pull the cable free of the centerboard

3. Cut the cable 12" from the centerboard winch shaft and push the cable out of the port end of the winch shaft

Installing New Cable

1. Take the bare end of the cable and feed it through the hole in the middle of the winch shaft making sure to

feed the cable out to PORT

2. Pull out enough cable to allow you to tie an overhand knot in the end of the cable

3. Hold the end of the cable beyond the knot with a pair of pliers and pull the other end of the cable to draw the

knot back into the shaft

4. Give a hard pull to set the knot

These instructions are intended for the exclusive use of Flying Scot, Inc. customers. Any unauthorized use is strictly prohibited.

Centerboard Cable Instructions

Image Is From Bow Looking Aft