Astro-Gadget EQStarProEQ5 사용자 설명서 - 페이지 11

{카테고리_이름} Astro-Gadget EQStarProEQ5에 대한 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Astro-Gadget EQStarProEQ5 19 페이지.

EQStarProEQ5 User Guide

The ST-4 port on the EQStarPro can also be used with an external guider like the Skywatcher

standalone SynScan guider.

To get the EQStarPro to accept guiding via the ST-4 port, connect the joystick remote and press and

hold the mode button (side of joystick box) for 5 seconds. EQStarPro will respond with a long beep.

The default guiding speed for each axis is x0.5. Pressing the RA + button up to three times will result

in x0.5, x0.75 and x1.0 speeds. Similarly, 'DEC +' button presses change the DEC guide speed from

x0.5 to x0.75 to x1.0. The EQStarPro will respond with appropriate beeps as these changes are

made.

Now disconnect the joystick and connect the autonomous guider to the ST-4 port.

To deactivate the ST-4 guiding mode, press and hold the joystick 'mode' button again for 5 seconds.