Canon BU-51H 빠른 시작 매뉴얼 - 페이지 2
{카테고리_이름} Canon BU-51H에 대한 빠른 시작 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Canon BU-51H 8 페이지. Canon remote control pan-tilt system
Canon BU-51H에 대해서도 마찬가지입니다: 포켓 매뉴얼 (22 페이지), 사용자 설명서 (2 페이지), 포켓 매뉴얼 (22 페이지), 원격 제어 매뉴얼 (2 페이지), 브로셔 및 사양 (4 페이지)
페이지 인쇄
Canon BU Series PTZ Camera Systems
prepared a number of Tech Notes, specifications and drawings designed to inform and educate integrators on the
value and the specific uses of Vaddio products.
UNPACKING
BU-47H System:
Carefully remove all of the parts from the packaging. Unpack and identify the following parts:
One (1) Canon BU-47H PTZ Camera
One (1) 12V PowerRite™ Power Supply with AC Cord Set (US or Euro and UK)
One (1) RS-232 to RS-422 Converter (998-1000-422)
One (1) RJ-45F to DB-9 Adapter (998-1005-232)
One (1) RJ-45F to DB-9 Adapter (998-1003-232)
One (1) RJ-45F to 12-pin Adapter
One (1) 3' Cat. 5e Patch Cable (341-192)
One (1) Vaddio Manual
One (1) Canon BU-47H Manual
Figure 2: BU-47H Connected to Vaddio ProductionVIEW Precision Camera Controller
Canon BU-46H
PTZ Camera
12 VDC, 10.0Amp
Power Supply
Basic Connectivity of the BU-47H Outdoor PTZ System:
The Vaddio/Canon BU-47H PTZ system uses a Cat. 5e for RS-232/RS-422 control to the camera. The RS-232 to RS-422 is
port powered and it is recommended to be located close to the control source. While the Cat. 5e cable can be run up to 500'
(152.4m) from the camera, the Canon BU-47H is rated for a distance up to 246' (75m). See Appendix 1 for wiring and pin-out
information.
Canon BU-Series PTZ Camera Installation and User Guide 341-909 Rev. C
DB9F to RJ-45F
RS-232 to RS-422
Adapter
RS-422 Cat. 5e to
the RJ-45 to 12-pin
adapter input on the
BU-47H Camera
Up to 500'
(152.4m)
of Cat. 5e
for Control
Coax Cable for HD-SDI
See Canon Manual for
Distance Limits
RJ-45F to DB-
9M Adapter
3 ft. Cat. 5e
RS-232
RS- 232 to
RS-422
Converter
ProductionVIEW Precision Camera Controller
To House HD-SDI
Switcher
Page 2 of 8