Acer Aspire 5000 Series 사용자 설명서 - 페이지 31

{카테고리_이름} Acer Aspire 5000 Series에 대한 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Acer Aspire 5000 Series 34 페이지. Acer
Acer Aspire 5000 Series에 대해서도 마찬가지입니다: 사용자 설명서 (15 페이지), 사용자 설명서 (17 페이지), 사용자 설명서 (30 페이지)

페이지 인쇄

Make sure that the printer cable is connected securely to the computer's

•

parallel port or a USB port and the corresponding port on the printer.

I want to set up my location to use the internal modem.

To properly use your communication software (e.g. HyperTerminal), you need

to set up your location:

Click on Start, Settings, Control Panel.

Double-click on Modems.

Click on Dialing Properties and begin setting up your location.

Refer to the Windows manual.

Note: Please note, on first booting your notebook, that you can

skip the Internet Connection setup, as it is not necessary to

complete the installation of your Operating System. After the

Operating System is setup, you can proceed with the Internet

Connection setup.

I want to restore my computer to its original settings without

recovery CDs.

Note: If your system is the multilingual version, the operating

system and language you choose when you first turn on the

system will be the only option for future recovery operations.

This recovery process helps you restore the C: drive with the original software

content that is installed when you purchase your notebook. Follow the steps

below to rebuild your C: drive. (Your C: drive will be reformatted and all data

will be erased.) It is important to back up all data files before you use this

option.

Before performing a restore operation, please check the BIOS settings.

Check to see if Acer disk-to-disk recovery is enabled or not.

Make sure the D2D Recovery setting in Main is Enabled.

Exit the BIOS setup utility and save changes. The system

will reboot.

Note: To activate the BIOS setup utility, press <F2> during POST.

Restart the system.