Canon CN20x50 Series 운영 매뉴얼 - 페이지 29

{카테고리_이름} Canon CN20x50 Series에 대한 운영 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Canon CN20x50 Series 33 페이지. Information display
Canon CN20x50 Series에 대해서도 마찬가지입니다: 빠른 시작 매뉴얼 (14 페이지), 운영 매뉴얼 (41 페이지)

페이지 인쇄

6 HOW TO ATTACH AND DETACH THE DRIVE UNIT

• If a drive unit fixing screw is damaged or lost, use a spare one.

If all spare screws are used and additional ones are required, contact Canon Inc. or Canon distributers & sales

representatives.

Set the zoom/focus operation change-over knobs of the

drive unit to MANU. side, set the iris operation mode

change-over switch to "M" side, and then turn the focus,

zoom and iris ring manually and check gear engagement.

Verify that the gear of the drive unit is engaged with the

gear of the lens and tighten the three fixing screws to the

specified torque to fix the drive unit.

* Tightening torque: 63 - 80 N•cm (6.4 - 8.2 kg•cm)

Mount the lens on the camera, connect the 12-pin cable,

switch the power on and adjust the mechanical end

automatically on the display.

* F o r d e t a i l s o n h o w t o a d j u s t t h e m e c h a n i c a l e n d

automatically, refer to "6-3 AUTOMATIC ADJUSTMENT OF

THE MECHANICAL END" on the next page.

E22