Dorel DA7253-1E 사용 설명서 - 페이지 17

{카테고리_이름} Dorel DA7253-1E에 대한 사용 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Dorel DA7253-1E 18 페이지.

Furniture Wall Safety Strap

MOUNTING BRACKET

4 PCS

TOOLS NECESSARY: RUBBER MALLET AND PHILLIPS SCREW DRIVER ARE NOT INCLUDED.

NOTE: 3/8" DRILL BIT AND ELECTRIC DRILL ARE NOT PROVIDED.

Step 1:

Attach a bracket securely to the back top rail of the furniture using the 5/8" screw provided, through the smaller

hole.

Step 2:

Locate the other bracket on the wall over a wall stud and 2 inches below the mounting bracket secured to the back

of your unit. Attach to the wallstud using the 2" screw provided, through the smaller hole.

Step 3:

Place the furniture into position so both mounting brackets are vertically in line.

Lace the end of the restraint strap through the larger hole in each mounting bracket. Bring both ends together and

Step 4:

slide the flat end through the locking end and draw it through until all slack is removed.

Confirm that the strap is securely laced and locked.

Step 5:

SAFETY WALL

STRAP

2 PCS

WARNING: WHEN UPRIGHT, IT IS POSSIBLE THAT THE

FURNITURE MAY TIP OVER. PLEASE INSTALL THE

SAFETY WALL STRAP BEHIND THE FURNITURE TO

ENSURE SAFETY.

PLEASE READ ALL INSTRUCTIONS CAREFULLY BEFORE

USING THIS PRODUCT AND KEEP THESE INSTRUCTIONS FOR

FUTURE REFERENCE. IF YOU HAVE ANY QUESTIONS, PLEASE

CALL OUR CUSTOMER SERVICE NUMBER: (800) 295-1980.

LONG SCREW

SHORT SCREW

2 PCS

C E

2 PCS