Canon EF 70-200mm f/2.8L IS II USM 지침 - 페이지 10

{카테고리_이름} Canon EF 70-200mm f/2.8L IS II USM에 대한 지침을 온라인으로 검색하거나 PDF를 다운로드하세요. Canon EF 70-200mm f/2.8L IS II USM 17 페이지. Ef zoom lenses
Canon EF 70-200mm f/2.8L IS II USM에 대해서도 마찬가지입니다: 지침 (2 페이지), 지침 (17 페이지), 부품 카탈로그 (16 페이지), 지침 (17 페이지), 지침 (2 페이지), 사용 설명서 (21 페이지), 사용 설명서 (11 페이지), 사용 설명서 (19 페이지), 사용 설명서 (18 페이지), 사용 설명서 (20 페이지), 사용 설명서 (20 페이지)

페이지 인쇄

Tips on Using the Image Stabilizer

• The Image Stabilizer cannot compensate for a

blurred shot caused by a subject that moved.

• Set the STABILIZER switch to

are taking pictures using the Bulb setting (long

exposures). If the STABILIZER switch is set to

, the image stabilizer function may introduce

errors.

• The Image Stabilizer might not be fully effective

in the following cases:

• You move the camera for a panned shot.

• You shoot while riding on a bumpy road.

• Compared to using a normal non-IS lens, fewer

shots can be taken when you use an Image

Stabilizer lens because more power is

consumed.

• The image stabilizer operates for about two

seconds even when your finger is off the shutter

button. Do not remove the lens while the

stabilizer is in operation. This will cause a

malfunction.

• With the EOS-1V/HS, 3, 30/33/Elan7/7E,

30V/33V/Elan7N/7NE, Elan ll/Elan ll E/50/50 E,

300/Rebel2000, IX, and D30, the Image

Stabilizer will not work during self-timer

operation.

• When you use a tripod, the Image Stabilizer

should be turned off to save battery power.

• The stabilizer is equally effective for hand-held

when you

photography and photography with a monopod.

• The Image Stabilizer function also operates

when the lens is used with the EF12 II or EF25

II Extension Tube, and the EF1.4X II or EF2X II

Extender.

• If you set the camera's Custom Function to

change the assigned button to operate the AF,

the Image Stabilizer will operate when you press

the newly assigned AF button.

ENG-9