AIR GUARD AG-1600 사용자 설명서 - 페이지 10

{카테고리_이름} AIR GUARD AG-1600에 대한 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. AIR GUARD AG-1600 13 페이지.

Step 3: Turn power on and release ▼ (DOWN) button when LCD display blinks

Step 4: Follow the instructions showed in the LCD display to pair or delete transmitters

Notes:

One machine can be controlled by up to 10 transmitters while one transmiter can be paired with

unlimited number of machines.

Transmitter battery replacement

If the wireless remote's working distance is reduced, it is possible the battery level is low. Undo the

screws on the back of transmitter case and remove the cover. Replace with the same type and

specification of battery which is 27A 12V.

Fluid

Service and Maintenance

Do not allow the machine and fluid to become contaminated.

․

Regularly fill distilled water to fluid tank and run the machine to clean the system. After

․

cleaning, refill Air Guard fluids into fluid tank and make sure machine can produce fog

properly.

It is recommended to run the machine on a monthly basis in order to achieve best

․

performance and output condition.

Excessive dust, liquid and dirt built up will degrade performance and cause overheating.

․

Use Air Guard Antibacterial Solution for AG-1600. The machine

is tested and calibrated with these authorized fluids to achieve

the best performance. Warranty will be void, if any other type

of liquid is used. Improper use of liquid may lead to machine

failure and danger.