flyingwings Venturi EVO 2 FPV 조립 설명서

{카테고리_이름} flyingwings Venturi EVO 2 FPV에 대한 조립 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. flyingwings Venturi EVO 2 FPV 10 페이지.

Thank you for purchasing the Venturi EVO FPV wing

The Venturi FPV is designed for First Person Viewing (FPV) and for UAV/Drone

experimentation.

There is a power system for this model, see the website for details.

As well as this power system you will require:

2 x Standard size servos 43g (standard size)

1 x Long range receiver

1 x Lipo battery(s) (2x 3300mah 3S or 4S 11.1v)

1 x connectors set

1 x Transmitter capable of elevon mixing or mixing module

1 x Lipo compatible charger

See website for power system details

HOT GLUE GUN

UHU POR

CA GLUE

PVA WOOD GLUE

CRITICAL DATA

CENTRE OF GRAVITY 185 +/-10mm

BACK FROM THE FOAM WING LEADING

EDGE AT ROOT

TARGET FLYING WEIGHT

2000 grams without FPV gear & camera

with 2 x 3300mah 4S batteries