AIR GUARD AG-800 사용자 설명서 - 페이지 5

{카테고리_이름} AIR GUARD AG-800에 대한 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. AIR GUARD AG-800 8 페이지.

페이지 인쇄
AIR GUARD AG-800 사용자 설명서
Wireless Transmitter Instruction
Wireless transmitter：
§
transmitter：Use DC 12V battery
Receiving distance：In an open space without obstacles, the effective distance is about 50 meters.
The actual situation depends on the number of obstacles, and the conservative distance is
about 10-25 meters.
Wireless receiver：
§
After the wireless receiver is tested, it will be fixed on the back panel of each AG-800 machine. Do
not try to unplug it.
Setting Function：
1.
All receivers can receive any transmitter to complete the frequency comparison。
2.
Each receiver can remember the signals of five groups of transmitters。
3.
Each transmitter has been set up at the factory, and users can use it without resetting. The initial
setting is to press the A button to start the machine, and press the B button to stop the
machine.
4.
4. If the user wants to control the machine through other transmitters (except the original
equipped transmitter), the setting needs to be completed within 15 seconds of the machine
being turned on, otherwise the machine will automatically leave the setting mode after 15
seconds。
Setting example:
There is an LED light on the control panel on the back of the machine. When the machine starts, the
green LED light on the back of the AG-800 machine will flash for 15 seconds.
M22 Moisture Co., Ltd.
Tel.+886 3 3225829 – Fax +886 3 3220433
www.airguard.com.tw