Air Gunsa AZ10 사용 설명서 - 페이지 2

{카테고리_이름} Air Gunsa AZ10에 대한 사용 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Air Gunsa AZ10 4 페이지.

SAFETY WARNINGS

FIRE OR EXPLOSION HAZARD

1. Spark and open flames are strictly prohibited.

Paints can be highly flammable and can cause fire.

Avoid any ignition sources such as smoking, open flames, electrical goods, etc.

2. Never use the following HALGOGENATED HYDROCARBON SOLVENTS

which can cause cracks or dissolution on gun body (aluminum) by chemical reaction.

- Unsuitable solvents: methyl chloride, dichloromethane, 1.2-dichloroethane,carbon tetrachloride, trichloroethylene, 1.1.1-

trichloroethane

(Be sure that all fluids and solvents are compatible with gun parts. We are ready to supply a material list used in the product.)

3. Securely ground spray gun by using air hose with built-in ground wire.

Ground wire : Less than 1MΩ. Check the earth stability periodically.

If not, insufficient grounding can cause fire and explosion due to static electric sparking.

IMPROPER USE OF EQUIPMENT

1. Never point gun towards people or animals.

If done, it can cause inflammation of eyes and skin or bodily injury.

2. Never exceed maximum operating pressure and maximum operating Temperature.

3. Be sure to release air and fluid pressures before cleaning, disassembling or servicing.

If not, remaining pressure can cause bodily injury due to improper operation or scattering of cleaning liquid.

In order to release pressure, first stop supply of compressed air, fluid and thinner to spray gun. Then remove

fluid adj. knob and pull fluid needle set towards you.

4. Tip of fluid needle set has a sharp point.

Do not touch the tip of fluid needle during maintenance for the protection of the human body.

PROTECTION OF HUMAN BODY

1. Use in a well-ventilated site by using spray booth.

If not, poor ventilation can cause organic solvent poisoning and catch fire.

2. Always wear protective gear (safety glasses, mask, gloves).

If not, cleaning liquid, etc., can cause inflammation of eyes and skin.

If you feel something wrong with eyes or skin, immediately see a doctor.

3. Wear earplugs if necessary.

Noise level can exceed 85 dB(A), depending on operating conditions and

painting site

4.If operators pull the trigger many times during operation, it may cause carpal tunnel syndrome.

Be sure to take a rest if you feel tired.

OTHER PRECAUTIONS

1. Never alter this spray gun.

If done, it can cause insufficient performance and failure.

2. Enter working areas of other equipment (robots, reciprocators, etc.) after machines are turned off.

If not, contact with them can cause injury.

3. Never spray foods or chemicals through this gun.

If done, it can cause accident by corrosion of fluid passages or adversely affect health by mixed foreign matter.

COMMENTS