Canon 0304B001 - EOS 1D Mark II N Digital Camera SLR 사용 설명서 - 페이지 17
{카테고리_이름} Canon 0304B001 - EOS 1D Mark II N Digital Camera SLR에 대한 사용 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Canon 0304B001 - EOS 1D Mark II N Digital Camera SLR 41 페이지. Canon eos 1d mark ii n: software guide
Canon 0304B001 - EOS 1D Mark II N Digital Camera SLR에 대해서도 마찬가지입니다: 사용 설명서 (28 페이지), 소프트웨어 설명서 (2 페이지)
페이지 인쇄
Correcting an Image
You can correct an image using the repair function or the copy stamp function.
Repairing
You can correct an image so that unwanted spots (spots you want to delete) on the image
blend with surrounding color.
Select the [Tools] menu
[Start Stamp tool].
1
The copy stamp window appears.
Click the [100% View] button.
2
The image is displayed in the 100% view.
Display the section you want to correct.
3
Drag the image to display the section you want to correct.
Click the [Repair (Light)] button or the [Repair (Dark)] button.
4
When the unwanted spot (spot you want to delete) is light in color, click the [Repair
(Light)] button and when it is dark in color, click the [Repair (Dark)] button.
Move the cursor over the image and the correction range is displayed as [O].
[Repair (Light)] button
Corrects an isolated light spot
within the correction range to
match the surrounding color.
The image is displayed at 100%
(actual pixel size). Click this
button again to display the image
in the size that fits to the window.
Drag the slider left or right, or
click the [ ] / [ ] buttons to
set the correction range.
Undoes the previous action.
Reverts to the original condition
before any corrections were
performed.
Copies the content of the
corrections specified.
Displays the previous image.*
Cancels all settings and closes
the window.
*Functions when you have selected multiple images and the copy stamp windows are displayed.
Cover the unwanted spot in the image with the correction range
5
[
] and click.
The unwanted spot within the correction range is corrected.
If you then click on the image, the unwanted spots within the selected correction
range are corrected.
To correct another section of the image, cancel the repair function by clicking the
[Repair (Light)] button or the [Repair (Dark)] button, and perform the operation from
step 3 again.
Click the [OK] button.
6
When sections of the image that cannot be corrected with the repair function have been
selected, [
] is displayed.
In step 2, you can double-click on the section you want to correct to display the 100%
view. You can also double-click again to return to the original view.
For information on shortcut keys, refer to the "Shortcut List" (p.5-3).
Cover/Table of
[Repair (Dark)] button
Contents
Corrects an isolated dark
spot within the correction
range to match the
surrounding color.
Displays the full screen. To
return to the original view, click
Introduction
this button again.
To switch between full screen
display/normal screen display,
press the <
> + <F11> keys
on the keyboard.
Displaying Thumbnail Images
1
and Performing Basic Edits
Redoes all the corrections.
Redoes the previous correction.
in the Main Window
Applies to the image the
content of the corrections
copied.
2
Performing Detailed
Displays the next image.*
Edits in the Edit
Window
3
Performing Detailed
Applies the settings and closes
Edits in the Edit
the window.
Image Window
Displaying an
4
Image in the Quick
Check Window
5
Reference
Index
1-11