Canon 2675B001 - SELPHY ES3 Photo Printer 초보자 매뉴얼 - 페이지 23
{카테고리_이름} Canon 2675B001 - SELPHY ES3 Photo Printer에 대한 초보자 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Canon 2675B001 - SELPHY ES3 Photo Printer 33 페이지. Software user guide for macintosh
Canon 2675B001 - SELPHY ES3 Photo Printer에 대해서도 마찬가지입니다: 소프트웨어 사용 설명서 (49 페이지), 소프트웨어 사용 설명서 (50 페이지)
Unidentified Image
You attempted to play back or print an image with corrupted data, an image recorded
•
in a foreign camera or data type, or an image that has been edited on a computer.
Select another image.
Cannot magnify!
•
You attempted to magnify an image with corrupted data, an image recorded with
another camera or data type, or an image that has been edited on a computer, or a
movie. Select another image.
Too many marks.
Too many images have been marked with print settings. Mark 998 or less images.
•
Cannot trim
•
You attempted to trim an image smaller than 640 x 480 pixels, larger than 5616 x
3744 or an image with a width-to-height ratio narrower than 16:9. Select another
image to trim.
Image not compatible
You attempted to put a speech bubble in an image smaller than 320 × 240 pixels,
•
larger than 5616 x 3744 or an image with a width-to-height-ratio narrower than 16:9.
Select another image size that allows speech bubbles to be set.
Device Not Supported
This displays when you attempt to connect an unsupported USB device, e.g. USB
•
memory. Disconnect the USB device. If the message returns, turn the printer off and
back on.
Device Not Supported (HUB)
You attempted to connect an unsupported USB connector, e.g. a USB hub.
•
Disconnect the USB hub.
Data Error
You attempted to add (update) or register incompatible or corrupted contents to the
•
printer.
•
If you are connecting via Bluetooth, try to establish the connection again. If the
message keeps reappearing several times, Bluetooth incompatibility or corrupted
data may be the problem. Select a different image.
23