Dorel Asia Eddie Bauer First Adventure Langley Crib DA5673DR 조립 지침 매뉴얼 - 페이지 10
{카테고리_이름} Dorel Asia Eddie Bauer First Adventure Langley Crib DA5673DR에 대한 조립 지침 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Dorel Asia Eddie Bauer First Adventure Langley Crib DA5673DR 13 페이지. Walnut/white
페이지 인쇄
D
A
WARNINGS:
* Any mattress used in this crib must be at least 27−1/4 inches by 51−5/8 inches (69cm by
131cm) with a thickness not exceeding 6 inches (15cm).
* The day bed is not intended for children under 15 months of age or over 50 pounds
(22.7 kgs).
NOTE: When inserting bolts, turn clockwise until tighten. Then loosen 1/2−3/4 of a turn.
After crib is completely assembled, return to each bolt and tighten. Use wax or
soap on all bolts to facilitate assembly.
STEP 1: Detach the assembled front panel (F & G) from the side panels (D & E) with Allen Key (4).
STEP 2: Move the mattress support (H) to the lowest position by unscrewing bolts (3) with
Allen Key (4).
STEP 3: Attach the front rail (G) (the curved edge should face up) to the side panels (D & E) with
bolts (2), spring washers (6) and Allen Key (4). First put the spring washers (6) in the hole,
second insert the hex socket head bolts (2) then tighten the bolts with allen key (4).
DAY BED ASSEMBLY INSTRUCTION: STARTING FROM SCRATCH
STEP 1: Follow steps 1 to 3 of the crib assembly instruction.
STEP 2: Follow steps 2 to 3 for the day bed assembly instruction located above (starting
from crib).
Langley Crib
DA5673DR / DA5673W
DAY BED ASSEMBLY INSTRUCTION
B
C
G
* the curved edge
should face up
DAY BED ASSEMBLY INSTRUCTION: STARTING FROM CRIB
E