ColdBlock CB15S 매뉴얼 - 페이지 7
{카테고리_이름} ColdBlock CB15S에 대한 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. ColdBlock CB15S 10 페이지.
페이지 인쇄
TYPE
Manual
SUBJECT
CB15S – Technical Specifications, Setup and Operation Manual
1. Grab the Cooling Block with both hands. Avoid grabbing with fingers inside the channel holes.
2. Lift the Cooling Block straight up. If the connection to unit is too tight, consider loosening the
four placement screws.
3. Carefully move the Cooling Block to the side.
To Replace the Cooling Block:
1. Before lifting take note of the position of the Cooling Blocks hose attachments as well as the
placement screws.
2. Lift with both hands. Avoid grabbing with fingers inside the channel holes.
3. Carefully position the Cooling Block over unit. Ensure that the hose attachment slots and
placement screws are where they need to be.
4. Lower the Cooling Block into position. The Cooling Block should sit flat on unit.
CB15S – Technical Specifications, Setup and Operation Manual
CBTI-MAN-001
Rev: 0
Page 6
Date Issued: 2019-11-13