COLDBUSTER FLOORHEATING MWD5 빠른 참조 사용 설명서 - 페이지 6
{카테고리_이름} COLDBUSTER FLOORHEATING MWD5에 대한 빠른 참조 사용 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. COLDBUSTER FLOORHEATING MWD5 7 페이지. Programmable thermostat
페이지 인쇄
SENSOR APPLICATION :
The default with the thermostat is the Floor sensor mode. It measures the floor temperature if it has been
placed between the heating elements. Suggested Floor temp is 25
The thermostat also has the option to be set to Room/Floor Limit & Room.
Room floor limit measures the room temperature but stays within the floor temp limitations. I.e., in the case
of wooden floors, it will not go over the suggested max floor temp of the manufacturer which is generally
o
around 27
C. For the minimum Limit, these are more suitable in very cold climates where the heating will
remain on if the floor temp were to go below that set temp.
Room sensor measures the room temperature & maintains the room at the set temperature. Suggested
room temps vary between 19
Remember, the higher the set temp whether it be Room temp or Floor temp or even your air conditioner for
that matter, the higher you set the higher your running cost will be.
How to change between the different options, do as follows.
Please revert to the Main user manual which can be emailed to you or downloaded from our website for
o
o
C to 21
C. Everyone is different as what they find comfortable.
Press the "Menu" button at
top right of the screen.
Press "Sensor Application
The
tick will confirm which setting you are currently on. You can now choose
one of the other 2 options that you would like to use.
Once you have made your choice
Press the
button.
greater description detail.
www.coldbuster.com.au
1800 85 75 65
C – 30
o
o
C.
Then press "Engineer
Settings"
It will now take you to this
screen, where it is just
confirming you want to use
the floor or room sensor
Press the
button.