Canon 7611A001 - S 330 Color Inkjet Printer 설정 지침
{카테고리_이름} Canon 7611A001 - S 330 Color Inkjet Printer에 대한 설정 지침을 온라인으로 검색하거나 PDF를 다운로드하세요. Canon 7611A001 - S 330 Color Inkjet Printer 2 페이지. Color buble jet printer
Canon 7611A001 - S 330 Color Inkjet Printer에 대해서도 마찬가지입니다: 빠른 시작 매뉴얼 (25 페이지)
페이지 인쇄
1
Unpack the Printer
Carefully remove all items from the box.
1
S330 Series
Color Bubble Jet Printer
Paper Rest
Output Tray
Documentation
and Software Kit
S330 Print Head
Power Cord
Ink Tanks
BCI-24 Black
BCI-24 Color
2
Prepare the Printer
Remove the shipping tape from the front
1
and sides of the printer.
Shipping Tape
2
Plug the power cord into the back of the
printer and connect the other end to a
power outlet.
3
Press the POWER button.
POWER
POWER
Lamp
Button
Open the front cover. The print head holder
4
automatically moves to the center.
Serial number
5
Write down the serial number located to
the right of the print head. You will need
this later to register the product.
Start Here
Easy Setup Instructions
3
Install the Print Head
Remove the print head from its package.
1
2
Turn the print head over, then remove
the orange protective cap.
NOTE: Do not touch the electrical contacts.
Electrical contacts
3
Raise the gray lock lever.
4
Slide the print head into the holder until
it is securely seated.
Do not press it down.
5
Lower the lever until it locks into place.
4
Install the Ink Tanks
Remove the black ink tank (BCI-24 Black)
1
from its packaging and pull off the orange
protective cap.
Protective cap
NOTE: To avoid spilling ink, do not touch the
bottom of the tank once you have removed
the protective cap.
2
Insert the black ink tank into the slot on
the right. Press down until the ink tank
locks into place.
3
Repeat the procedure for the color ink tank
(BCI-24 Color), inserting it into the remaining
slot.
4
Close the front cover and attach the
paper rest and output tray.
Color Bubble Jet Printer
S330
5
Connect the Printer
To Your Computer
Turn the printer off.
1
IMPORTANT: Be sure printer is
off before continuing, or the
computer will attempt to install
the printer driver before the
printer is ready.
2
Connect one end of a USB cable (not
included) to the computer, the other to
the printer.
USB Port
USB Cable
Continue with Step 6
on side two.