Coldelite UF-203G 매뉴얼 - 페이지 3

{카테고리_이름} Coldelite UF-203G에 대한 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Coldelite UF-203G 17 페이지. Gravity soft serve freezers

PART I

CLEANING PROCEDURES

Cleaning and sanitizing schedules are governed by your State

or local regulatory agencies and must be followed accordingly.

A well planned cleaning schedule will eliminate excessive

waste of time and product within your organization.

3) Place a container or bucket under the spigot head. Slowly

pull the handle down and remove remaining product from

the cylinder.

On a designated day(s) of the week, allow the mix in the mix

tank t o run as low as feasible.

Proceed t o clean the machine, as follows:

1) Remove the Gravity Feed Tubes. Pull the tubes straight up

and out.

4) When the product has stopped flowing, turn the Selector

Switch to the

OFF

position. Close the spigot handle.

2) Turn the Selector Switch to BEATER position and let the

machine run for 4 t o 5 minutes. This will soften the product

in the cylinder and allow the remaining product to be removed

more easily.