Canon DIGITAL IXUS v EOS D30 사용 설명서 - 페이지 7

{카테고리_이름} Canon DIGITAL IXUS v EOS D30에 대한 사용 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Canon DIGITAL IXUS v EOS D30 42 페이지. Chapter 4
Canon DIGITAL IXUS v EOS D30에 대해서도 마찬가지입니다: 사용 설명서 (28 페이지), 사용 설명서 (41 페이지), 부품 카탈로그 (44 페이지)

페이지 인쇄

Prepare to Download Images

Setting a Camera with [Communication] Settings

For a camera with [Communication] included as a menu function, you can communicate with

EOS Utility to download images to your computer by selecting a [Communication] setting.

The setting on this page is necessary for the EOS 5D, EOS 30D, EOS 20D, EOS 10D,

EOS DIGITAL REBEL XT/350D DIGITAL and EOS DIGITAL REBEL/300D DIGITAL.

For cameras other than the above, it is not necessary to perform settings for the

camera. Continue with the procedure in "Connect the Camera and the Computer and

then Start EOS Utility" (p.1-3).

Check that the camera is not connected to the computer and then

set the camera's power switch to <ON>.

Set the camera's [Communication].

With the EOS 30D, set [

Communication]

in menu to [Print/PC].

Set the [Communication] for other

cameras in the same procedure as the

EOS 30D, using the following for a

reference.

[Communication] settings for different cameras

Camera model

EOS 5D

EOS 30D

EOS 20D

EOS 10D

EOS DIGITAL REBEL XT/350D DIGITAL

EOS DIGITAL REBEL/300D DIGITAL

Press the <

> button to switch the LCD monitor display off

and then set the camera's power switch to <OFF>.

Operation window in the EOS 30D

Setting

[

Communication]

[PC connect.]

[

Communication]

[Print/PC]

[

Communication]

[Normal]

[Communication]

[Normal]

[

Communication]

[PC connection]

[

Communication]

[Normal]

When setting the [Communication], always ensure that the camera is not connected

to the computer beforehand. Setting the [Communication] while the camera is

connected to the computer will cause camera and software malfunctions.

When using the EOS 5D or EOS DIGITAL REBEL XT/350D DIGITAL, the remote

shooting function and camera setting function in EOS Utility cannot be used if the

camera's [Communication] is set to [Print/PTP].

When using the EOS 30D, the camera and EOS Utility cannot communicate if the

camera's [Communication] is set to [LAN (WFT-E1)].

When using the EOS 20D, EOS 10D or EOS DIGITAL REBEL/300D DIGITAL, the

camera and EOS Utility cannot communicate if the camera's [Communication] is set

to [PTP].

With the EOS 10D, you must change the firmware to version 2.0.0 or later. For details

on changing, refer to the Canon's web site.

About the PTP Setting

When using Windows XP, you can also download JPEG images that use the PTP (Picture

Transfer Protocol) function (p.1-8).

Cover/Table of

Contents

Introduction

Downloading Images

from the Camera

Setting the Cameras

other than the EOS-1D

Series Cameras

Setting the EOS-1D

Series Cameras

Remote Shooting

Troubleshooting

Index

1-2