coldline BBC-65 사용자 설명서 - 페이지 3

{카테고리_이름} coldline BBC-65에 대한 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. coldline BBC-65 9 페이지. Horizontal bottle coolers

TEMPERATURE CONTROLS

The temperature controls are factory-set to maintain an average temperature of 38 F

in refrigerators. To maintain a different temperature, simply adjust the control knob

located inside the unit.

To decrease the temperature (coIder), turn clockwise. To increase the temperature

(warmer), turn counter-clockwise - see diagram

The bin dividers have been installed at the factory for your convenience. Feel free to

reposition the dividers as you see fit. To remove the bin dividers, simply push the

divider towards the back wall until the front of the divider is removed from the

positioning holes. To install, position the divider to the desired holes, making sure

that the pressure spring is installed properly.

PAY CLOSE ATTENTION TO THE LOAD LIMIT STICKERS LOCATED ON THE

INTERIOR WALLS OF THE UNIT. DO NOT LOAD PRODUCT ABOVE THE LOAD

LIMIT STICKERS OR ABOVE THE TOP CROSS BAR OF THE BIN DIVIDERS.

LOADING PRODUCT ABOVE THE LOAD LIMIT STICKERS WILL HARM THE

PERFORMANCE OF THE UNIT.

CAUTION

Setting the temperature control to the coldest setting may cause the evaporator coil

to freeze and ice up. This will eventually result in a warmer cabinet temperature.

USRESTAURANT® RESERVES THE RIGHT TO CHANGE SPECIFICATIONS WITHOUT NOTICE