Canon EOS 350D 펌웨어 업데이트 절차 - 페이지 2

{카테고리_이름} Canon EOS 350D에 대한 펌웨어 업데이트 절차을 온라인으로 검색하거나 PDF를 다운로드하세요. Canon EOS 350D 6 페이지. For windows
Canon EOS 350D에 대해서도 마찬가지입니다: 브로셔 및 사양 (8 페이지), 사용 설명서 (28 페이지), 사용 설명서 (41 페이지), 소프트웨어 설명서 (2 페이지), 소프트웨어 설명서 (2 페이지)

Canon EOS 350D 펌웨어 업데이트 절차
Firmware Update Procedures
In the following instructions, x.x.x. indicates either the current firmware version or the firmware version
for the update.
 
e3kr2xxx.exe
("xxx" will be different for each firmware
version.)
 
EOS DIGITAL REBEL XT / EOS 350D DIGITAL Firmware Update Procedures
(1) Format the CF Card
Be sure to carefully review the contents of the CF card
before formatting.
Insert the CF card into the camera, and turn on the Main
Switch. Press "MENU" button and select the tools "Setup"
menu. And then select "FORMAT" and then accept the
confirmation to initialize the CF card.
* For firmware update, be sure to use a blank CF card
formatted with the camera.
(2) Download the firmware update file from the Web
page.
The file for updating the camera's firmware can be
downloaded from the Web page. Please download the
compressed, self-extracting file that matches your
computer's operating system.
Extract the file downloaded from the Web and create the
firmware update file. Copy the firmware update file in the
first window that appears when the CF card is opened (the
root directory).
The name of the firmware update file is "e3kr2xxx.fir".
("xxx" will be different for each firmware version.)
The name and size of the firmware update file can be
checked on the Web site.
 
Windows
Double-click the downloaded file.
 
Clicking "OK" will cause the file's contents to be extracted
and the firmware update file to be created. (Click "Browse"
to select a destination for the extracted files. This
destination may be different from the path initially
displayed, "C: ".)
Confirm file size of the firmware update file. If the file
size differs, please download the file again from the Web
site.
You can confirm this by right-clicking the icon and
selecting the Properties command from the pop-up menu
that appears.
 
 
2