DAD DXZ88 사용자 설명서 - 페이지 9

{카테고리_이름} DAD DXZ88에 대한 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. DAD DXZ88 16 페이지. Matrix processor

DXZ48

2.1 . Gain

Adjust the gain by dialing the rotary encoder. The gain is adjusted in steps of 0.25dB. Smaller steps (0.01dB)

can be set via the PC or MAC interface.

2.2 . Input Selection

Select the source (Analog) by rotating the encoder.

2.3 . Channel Link

By linking 2 channels, the settings are guaranteed to be identical for both channels, except for mixer and

mute. Turn the encoder to set the Channel Link on or off.

Output Setup

3 .

Press the Channel Up or Down button to select the output channel you wish to edit. Make the first settings

with the output turned low or muted.

To toggle through the different items, press the Item Up or Item Down buttons.

3.1 . Gain

Adjust the gain by dialing the rotary encoder. The gain is adjusted in steps of 0.25dB. Smaller steps (0.01dB)

can be set via the PC or MAC interface.

3.2 . Mixer

Turn the rotary encoder to mix the signal from the selected input to the selected output. Push the rotary

encoder to select the input. Attention: The mixer is only available while the outputs are not linked by

Channel Link. If the channels are linked, the mixer will be skipped.

3.3 . Delay

Set the delay time by turning the encoder. Select the displayed unit (ms or s, mm or m, feet, inches, or mils)

by pushing the encoder.